PSA oxygen generator from China factory with the features of easily moving and conveniently operate
1. Working principle of High pressure oxygen generator:
On the basis of the discrepancy between adsorption capacity and diffusion rate, PSA oxygen generator utilizes the ability of ZMS(Zeolite Molecular Sieve) to absorb most nitrogen in the compressed air. While controlling the PLC, the qualified purity of oxygen will be achieved through the process of pressuring adsorption and decompressing desorption. The whole system consists of the following components: compressed air purification module, air storage tank, oxygen and nitrogen separation device, oxygen buffer tank.
2. Technical features of PSA industrial oxygen generator:
- Compressed air with the excellent quality can prolong the service life of molecular sieve that keeps the machine in a good situation;
- Compact structure of the equipment, reducing the cover of land and capital investment;
- PLC control can conduct the machine intelligently, reducing the failure rate of operation;
- The qualified gas will be achieved within 20 minutes;
- Low energy consumption and low operating costs for power supply ;
- Low cost of labor because there is no need to control the machine by person;
- The solid and compact structure of molecular sieve can improve the efficiency and prolong the service life;
- The pressure, purity and flow rate can be adjusted to meet the different needs of customers;
- Reasonable structure, advanced process ensures the safe and stable of the machine;
- Compared with the high cost of bottled oxygen and liquid oxygen operation, oxygen making machine has the lowest cost of oxygen making. For enterprises engaged in medical treatment, plateau, breeding, environmental protection and combustion support for a long time, using oxygen making machine is the most cost-effective;
3. Main Application Fields:
Oxygen-enriched combustion, industrial oxygen generator can be widely used in petrochemical industry, electric furnace steel making, paper making, glass production, making ozone, aquaculture, sewage treatment, aerospace and other industries and fields, for the different requirements of different users of different industries use of oxygen, since provide personalized, specialized oxygen equipment, fully meet the requirements of different users of gas.
4. PSA industrial oxygen generator system flow
- Compressed air purification units: Raw material is providing by this unit for the whole system. The material air keeps the low cost and it is quiet friendly to the environment.
- Air storage tank:The role of the air tank is to reduce the air pulsation of piston air compressor, improve the continuity and pressure stability of the output air flow, further precipitate and separate the water and oil in the compressed air, and ensure the continuous supply of enough air. Also, it can protect the compressor so it will serve for a longer time.
- Oxygen and nitrogen separation unit:There are two adsorption towers A and B which have special molecular sieve -- ZMS. N2 will be adsorbed and O2 will flow through the pipeline into tower B when the clean compressed air enters into the tower A. In tower A, the molecular sieve will be saturated after some time of adsorbing and it will stop adsorbing automatically. Then compressed air passes through tower B for absorption of nitrogen and production of oxygen. In tower A, the molecular sieve will be regenerated by the different pressure, as well as releasing the adsorbed nitrogen. These processes are controlled by the programmable logic controller (PLC). When the oxygen purity is lower than the rated one, PLC will evacuate the valve automatically to release the unqualified oxygen. It makes sure that the quality of the required gas and the unqualified one will not go back to the pipeline.
- Oxygen buffer tank:In order to keep the stability of supplying oxygen continuously, the oxygen buffer tank plays the role of balancing the pressure. Meanwhile, when switching of the adsorption tower, it will recharge part of the gas itself to the adsorption tower. On one hand, it helps to boost the pressure in adsorption tower. On the other hand, it can protect the bed of molecular sieve. It has contributed to the technological assistance greatly in the working process.
Technical characteristics of pure oxygen outlet
Production:96 Nm3/h
Purity:90%--93%
Pressure:0.4—1.0Mpa
Atmospheric dew point:--40℃(under normal pressure)
Temperature: normal temperature
Product Picture:
Product Tags:
|
|
Container Type Oxygen Generation System Easy Move And Convenient Operate Images
|
